Traceability assurance of results of measurements for pollutant substances content in industrial emissions by automatic measuring systems
https://doi.org/10.20915/2687-0886-2020-16-4-17-26
Abstract
The results of the development of a gas mixing and analytical stand (reference complex) for testing in order to approve the type of automatic measuring systems (AMS) for determining the content of pollutants in industrial emissions are presented. During the use of the AMS test bench, the units of molar fraction and mass concentration are transferred from the State primary standard of units of molar fraction, mass fraction and mass concentration of components in gas and gas condensate media GET 154 to the tested measuring gas channels of AMS, thereby ensuring traceability of AMS measurement results to the State primary standard GET 154.
About the Authors
A. V. Mal’ginovRussian Federation
Andrei V. Mal’ginov – Senior Scientist, Research Department of State Standards in the fields of Physical and Chemical Measurements D. I. Mendeleyev Institute for Metrology (VNIIM), 19 Moskovskiy ave., St. Petersburg, 190005, Russian Federation
O. G. Popov
Russian Federation
Oleg G. Popov – PhD (Chem.), Senior Scientist, Research Department of State Standards in the fields of Physical and Chemical Measurements D. I. Mendeleyev Institute for Metrology (VNIIM), 19 Moskovsky ave., St. Petersburg, 190005, Russian Federation
A. V. Kolobova
Russian Federation
Anna V. Kolobova – PhD (Eng.), acting head of the research department of state standards in the field of physical and chemical measurements D. I. Mendeleyev Institute for Metrology (VNIIM), 19 Moskovsky ave., St. Petersburg, 190005, Russian Federation
L. A. Konopelko
Russian Federation
Leonid A. Konopelko – D. Sc. (Eng.), professor of learning department Theoretical and Practical Metrology, D. I. Mendeleyev Institute for Metrology (VNIIM), 19 Moskovsky ave., St. Petersburg, 190005, Russian Federation
Y. A. Kustikov
Russian Federation
Yuriy A. Kustikov – PhD (Eng.), deputy director for international affairs D. I. Mendeleyev Institute for Metrology (VNIIM), 19 Moskovsky ave., St. Petersburg, 190005, Russian Federation
References
1. Federal low «On amendments to the Federal Law «On Environmental Protection» and certain legislative acts of the Russian Federation» No 219-FZ of 27/07/2014. Moscow. Available at: http://www.consultant.ru/document/cons_doc_LAW_165823/. (In Russ.).
2. Federal low «On Amending the Federal Law «On Environmental Protection» and Articles 1 and 5 of the Federal Law «On Amendments to the Federal Law» On Environmental Protection «and Certain Legislative Acts of the Russian Federation» in terms of creating systems for automatic control of emissions of pollutants, discharges pollutants» No 252-FZ of 29/07/2018. Moscow. Available at: http://www.consultant.ru/document/cons_doc_LAW_303483/. (In Russ.).
3. Government decree «On requirements for automatic means of measuring and recording indicators of emissions of pollutants and (or) discharges of pollutants, for technical means of recording and transferring information on indicators of emissions of pollutants and (or) discharges of pollutants to the state register of objects that have a negative impact on the environment» No 263 of 13/03/2019. Moscow. Available at: http://publication.pravo.gov.ru/Document/View/0001201903150011. (In Russ.).
4. Government decree «On approval of the Rules for the creation and operation of a system for automatic control of emissions of pollutants and (or) discharges of pollutants» No 262 of 13/03/2019. Moscow. Available at: http://publication.pravo.gov.ru/Document/View/0001201903150003. (In Russ.).
5. GSE. State verification scheme for measuring instruments for the content of components in gas and gas condensate environments. (In Russ.).
6. GOST R8.959-2019 State system for ensuring the uniformity of measurements. Best available techniques. Automated measuring systems for control of harmful industrial emissions. Verification procedure. Moscow, Standartinform, 2019. (In Russ.).
7. GOST R8.958-2019 State system for ensuring the uniformity of measurements. Best available techniques. Automated measuring systems for control of harmful industrial emissions. Methods and means of tests. Moscow, Standartinform, 2019. (In Russ.).
8. Information and technical guide to the best available ITS technologies 22.1–2016. General principles of industrial environmental control and its metrological support. Moscow, Biuro NDT, 2016, 541 p. (In Russ.).
Review
For citations:
Mal’ginov A.V., Popov O.G., Kolobova A.V., Konopelko L.A., Kustikov Y.A. Traceability assurance of results of measurements for pollutant substances content in industrial emissions by automatic measuring systems. Measurement Standards. Reference Materials. 2020;16(4):17-26. (In Russ.) https://doi.org/10.20915/2687-0886-2020-16-4-17-26

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0).