DEVELOPMENT OF A REFERENCE MATERIAL FOR WATER INDUSTRY
https://doi.org/10.20915/2077-1177-2015-0-4-22-27
Abstract
The aim of our work was to develop and evaluate a homogenised material for the new IONEX resin reference material for NORM industries. The IONEX resin is a material from water purification filters. This work is a part of the European Research Project MetroNORM "Metrology for Processing Materials with High Natural Radioactivity", contract identifier JRPIND57. The current research resulted from the necessity of installing the technology for removing uranium from water in some areas in Europe [1, 2]. The European project JRP IND57 MetroNORM is perfectly suited for an accurate and precise determination of hazardous NORM materials. Proper evaluation of NORM materials is highly needed for the protection of health and minimization of economic and ecological burdens.
About the Authors
M. . Mazanova
Czech Metrology Institute
Russian Federation
Russian Federation
V. . Zdychova
Czech Metrology Institute
Russian Federation
Russian Federation
P. . Dryak
Czech Metrology Institute
Russian Federation
Russian Federation
R. . Bludovsky
Czech Metrology Institute
Russian Federation
Russian Federation
References
1. Czech Government Decree No. 18/1997 SB. Czech Republic 2002.
2. Guidelines for drinking-water quality - 4th edition. ISBN 978 92 4 154815 1. WHO 2011.
3. Dryak P., Kovar P. Table for true summation effect in gamma-ray spectrometry. Journal of Radioanalytical and Nuclear Chemistry, vol. 279, No.2 (2009), pp. 385-394.
4. Table de Radionuclides, 2015. Available at: http://www.nucleide.org/DDEP_WG/DDEPdata.htm.
Review
For citations:
Mazanova M., Zdychova V., Dryak P., Bludovsky R. DEVELOPMENT OF A REFERENCE MATERIAL FOR WATER INDUSTRY. Measurement Standards. Reference Materials. 2015;(4):22-33. (In Russ.) https://doi.org/10.20915/2077-1177-2015-0-4-22-27
Views:
620
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0).
Email this article 
