Multiparametric reference materials for metrological support in the area of coating parameter control
https://doi.org/10.20915/2077-1177-2018-14-3-4-9-15
Abstract
The present work analyses the state and development prospects of metrological support and standardization of in the field of measuring surface density, thickness and chemical composition of coatings. The main characteristics of the State Primary Measurement Standard GET 168-2015 and developed multiparameter reference materials are described.
About the Authors
V. V. Kazantsev
FGUP Ural Research Institute for Metrology, Ekaterinburg
Russian Federation
Ph.D (Chem), Science Deputy Director
Russian Federation
Ph.D (Chem), Science Deputy Director
A. S. Vasilyev
FGUP Ural Research Institute for Metrology, Ekaterinburg
Russian Federation
researcher
Russian Federation
researcher
References
1. Kazantsev V. V., Vasiliev A. S. Metrological Assurance and Standardization Status and Future Development for Nondestructive Testing of Coating Parameters Using Radiation Methods. NDT World. 2017; 20(1):30–31. (In Russ.).
2. Kazantsev V. V., Medvedevskih S. V., Vasilyev A. S. Statepri marymeasurementstandardofsurfacedensityandmassfractiono felementsincoatings GET 168-2015. Measurement Techniques. 2018; (9):17–19. (In Russ.).
3. Kazantsev V. V., Vasiliev A. S. The study of methods and tools for production of multi-parameter reference materials for composition and properties of coatings. Reference materials. 2014;(1):42–46. (In Russ.)
4. Sobina E. P., Medvedevskikh S. V., Kazantsev V. V. et all. Creating a standard specimens of composition, thickness, and surface density of permalloynanocoatings on silicon. Industrial laboratory. Diagnostics of materials. 2012;78(8):64–68. (In Russ.)
5. IgnatovaYu. A., Yeritenko A. N., Revenko A. G., Tsvetyansky A. L. X-RAY fluorescenceanalysisofsolidfilmsandco verings. Analitika i kontrol. 2011;15(2):126–140. (In Russ.)
6. Mashin N. I., Ershov A. V., Mashin A. I., Tumanova A. N. Determination of the composition and thickness of Со-Ni/Cr system films by X-ray fluorescence. Journal of Applied Spectroscopy. 2000;55(6):689–691.
7. Mashin N. I., Leont’eva A. A., Lebedeva R. V., Toumanova А. N. Determination of the composition and thickness of double-layer Fe–Ni–Mo/Cr by X-ray fluorescence analysis. Vestnik of Lobachevsky University of Nizhni Novgorod. 2009;(2):89–95. (In Russ.)
8. GOSTR 8.612-2011 State system for ensuring the uniformity of measurements. State verification schedule for means of measuring the surface density of coating in the range from 0,0001 to 1,000 kg/m2. Moscow: Standartinform Publ., 2014. 6 pp. (In Russ.).
9. GOST R 55613–2013 Nondestructive testing. Reference measures for calibration of thickness gauges of inorganic coverings. General. Moscow: Standartinform Publ., 2015. 5 pp. (In Russ.).
10. ASTM B 568–98 (2014) Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
11. DIN 51418-2-2015 X-ray spectrometry – X-ray emission and X-ray fluorescence analysis (XRF) – Part 2: Definitions and basic principles for measurements, calibration and evaluation of results.
12. ISO 3497:2000 Metallic coatings -Measurement of coating thickness – X-ray spectrometric methods. Available at: URL: www.iso.org/standard/20319.html
13. MV-07-GET-168–2015 GSI. The procedure for reproducing the units of surface density and mass fraction of elements in coatings using GET 168
14. МRN-10-GET-168–2015 GSI. The procedure for calculating the uncertainty of reproducing the units of surface density and the mass fraction of elements in coatings using GET 168
15. RMG 53–2002State system for ensuring the uniformity of measurements. Reference materials. Evaluation of metrological characteristics with the use of measurement standards and reference devices. Moscow: Publishing House of Standards, 2004. (In Russ.).
16. MVV-GVET 196-1-2012 GSI. The procedure for reproducing the unit of element mass fraction in coatings using GVET 196-1-2012.
17. GOST 9.302–88 Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods. Moscow: Publishing House of Standards, 2001. (In Russ.).
18. GOST8.531-2002 State system for ensuring the uniformity of measurements. Reference materials of composition of solid and disperse materials. Ways of homogeneity assessment. Moscow, Publishing House of Standards, 2002. (In Russ.).
Review
For citations:
Kazantsev V.V., Vasilyev A.S. Multiparametric reference materials for metrological support in the area of coating parameter control. Measurement Standards. Reference Materials. 2018;14(3-4):9-15. (In Russ.) https://doi.org/10.20915/2077-1177-2018-14-3-4-9-15
Views:
820
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0).
Email this article 
