Creating procedures for determining the content of main components in reagents used for synthesizing certified reference materials for composition
https://doi.org/10.20915/10.20915/2077-1177-2017-13-2-27-36
Abstract
Actuality of the research. The need for the development and validation of analysis methods of reagents used for the introduction of elements into reference materials, certified according to the procedure of preparation. The purpose. Development and certification of methods for determining the content of the main component in the reagents used to prepare reference materials. Research methods. Gravimetry, titration, atomic emission spectral analysis with arc excitation, atomic emission spectral analysis with inductively coupled plasma as an excitation source, mass spectral analysis with inductively coupled plasma as ion source. Results. The characteristics of the error of the measurement results are estimated, the Certificates of Attestation of the methods are received, the information is included in the Federal Information Fund.
About the Authors
Margarita A. Dombrovskaya
Ural Federal University named after the first President of Russia B. N. Yeltsin
Russian Federation
Cand. Sci. (Chem.), Associate Professor, Department of Physical and Chemical Analysis, Institute of Physics and Technology, UrFUHead of AFC – Abritration Laboratory for Testing of Nuclear Engineering Materials
Russian Federation
Cand. Sci. (Chem.), Associate Professor, Department of Physical and Chemical Analysis, Institute of Physics and Technology, UrFUHead of AFC – Abritration Laboratory for Testing of Nuclear Engineering Materials
Dmitriy G. Lisienko
Ural Federal University named after the first President of Russia B. N. Yeltsin
Russian Federation
Cand. Sci. (Chem.), Associate Professor, Department of Physical and Chemical Analysis, Institute of Physics and Technology, UrFU, Director of AFC – Abritration Laboratory for Testing of Nuclear Engineering Materials
Russian Federation
Cand. Sci. (Chem.), Associate Professor, Department of Physical and Chemical Analysis, Institute of Physics and Technology, UrFU, Director of AFC – Abritration Laboratory for Testing of Nuclear Engineering Materials
Evgeniya D. Kubrina
Ural Federal University named after the first President of Russia B. N. Yeltsin
Russian Federation
Senior Engineer, Department of Physical and Chemical Analysis, Institute of Physics and Technology, UrFU
Russian Federation
Senior Engineer, Department of Physical and Chemical Analysis, Institute of Physics and Technology, UrFU
References
1. MI 1992–98 State system for ensuring the uniformity of measurements. Metrological certification of reference materials of composition of substances and materials for preparation procedure. Main principles. Ekaterinburg, 1998, 11 p. (In Russ.)
2. Lisienko D. G., Dombrovskya M. A. Certified reference materials of graphite collector of microimpurities: synthesis, certification, application. Analitika i control, 2005, vol. 9, no. 23, pp. 285–294. (In Russ.)
3. Lisiyenko D. G., Dombrovskaya M. A., Muzgin V. N. Development features of certified reference materials for metrological assurance of impurities determination methods in uranium materials // Abstracts XVIII Mendeleev Congress on General and Applied Chemistry. Moscow, 2007. Vol. 4. 178 p. (In Russ.)
4. GOST 10398–76 Reagents and super pure substances. Complexonometric method for determination of basic matter content. Moscow, Standartinform Publ., 1988. 30 p. (In Russ.)
5. GOST 11069–2001 Primary aluminium. Grades. Minsk, Publ. standartov, 2004, p. 2. (In Russ.)
6. GOST 13099–2006 Iridium. Marks. Moscow, Standartinform Publ., 2007. 2 p. (In Russ.)
7. GOST ISO Guide 35–2015 Reference materials. General and statistical principles for certification. Moscow, Standartinform Publ., 2016, 61 p. (In Russ.)
8. Korostelev V. V. Reagents and solutions in metallurgical analysis. Moscow: Metallurgiya, 1977. 400 p. (In Russ.)
9. Bimish F. Analytical chemistry of precious metals. Vol. 2. Moscow: Mir 1969. 399 p. (In Russ.)
10. Ryabchikov D. I., Ryabukhin V. A. Rare earth elements and yttrium. Series: Analytical Chemistry of Elements. Moscow: Science, 1966. 380 p. (In Russ.).
11. Zolotov Yu. A. Fundamentals of Analytical Chemistry. Vol. 1. Moscow: High school, 1999, pp. 117–30. (In Russ).
12. GOST 4199–76 Reagents. 10–aqueous sodium tetraborate. Specifications. Moscow, Publ. standartov, 1988.
13. 14 p. (In Russ.)
14. Lidin R. A., Molochko V. A., Andreyeva L. L. Chemical properties of inorganic substances. Moscow, Chemistry, 1997. 480 p. (In Russ.)
15. GOST R 55845–2013 Reagents and high purity substances. Determination of impurities of chemical elements by atomic– emission spectrometry with inductively coupled plasma. Moscow, Standartinform Publ., 2014. 20 p. (In Russ.)
16. GOST 27566–87 Superpure substances. Method of
17. atomic emission spectroscopy for determination of chemical elements impurities in liquid-phase substances. Moscow, Publ. standartov, 1988. 9 p. (In Russ.)
18. Lisienko D. G., Dombrovskya M. A., Kubrina E. D., Varkentin N. Ya. Synthesis and evaluation of metrological characteristics of potassium fluorozirconate certified reference material. Standartnye obrazсy=Reference materials, 2016, no. 3, pp. 47–60. (In Russ.) DOI 10.20915/2077-1177-2016-0-3-47-60.
19. Kouzov P. A. Basic principles of the analysis of particle size of industrial dusts and grinded materials. Ltningrad, Chemistry, 1974, 280 p. (In Russ.)
20. Lurye Yu. Yu. Handbook of Analytical Chemistry. Moscow. Chemistry, 1989, 45 p. (In Russ.)
21. GOST R 53228–2008 Non–automatic weighing instruments. Part 1. Metrological and technical requirements. Tests. Moscow, Standartinform Publ., 2010, p. 23. (In Russ.)
22. Lisienko D. G., Dombrovskaya M. A., Lisienko M. D. Certified reference materials for composition of metal ion solutions for calibration of instruments with inductively coupled plasma. Standartnye obrazсy=Reference materials, 2010, no. 3,
23. pp. 45–56. (In Russ.).
24. GOST R 8.736-2011 State system for ensuring the uniformity of measurements. Multiple direct measurements. Methods of measurement results processing. Main principles. Moscow, Standartinform Publ., 2012, 20 p. (In Russ.)
25. GOST R 54500.3–2011 Uncertainty of measurement.
26. Part 3. Guide to the expression of uncertainty in measurement. Moscow, Standartinform Publ., 2012, 107 p. (In Russ.)
27. PMG 96–2009. State system for ensuring the uniformity of measurements. Results and characteristics of measurement quality. Submission forms. Moscow: Standartinform, 2010,
28. 21 p. (In Russ.)
29. GOST R ISO 5725-1-2002 Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions. Moscow, Standartinform, 2002, 23 p. (In Russ.)
30. Bishop E. Indicators. Vol. 1. Moscow, Mir, 1976, p. 74. (In Russ.)
31. Alekseyev V. N. Quantitative analysis. Moscow, Goskhimizdat, 1963, p. 232. (In Russ.)
32. RMG 61–2010 State system for ensuring the uniformity of measurements. Accuracy, trueness and precision measures of the procedures for quantitative chemical analysis. Methods of evaluation. Standartinform, 2012, 54 p. (In Russ.)
Review
For citations:
Dombrovskaya M.A., Lisienko D.G., Kubrina E.D. Creating procedures for determining the content of main components in reagents used for synthesizing certified reference materials for composition. Measurement Standards. Reference Materials. 2017;13(2):27-36. (In Russ.) https://doi.org/10.20915/10.20915/2077-1177-2017-13-2-27-36
Views:
899
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0).
Email this article 
