Analysis of the Metrological Characteristics of the Speckle Dilatometer of the State Secondary Standard of the Unit of Thermal Coefficient of Linear Expansion of Solids in the Range of Values From 0.05 · 10–6 to 100.0 · 10–6 K–1 in the Range of Temperature Values from 90 to 1,900 K
https://doi.org/10.20915/2077-1177-2025-21-2-5-22
Abstract
Thermal expansion is an important design parameter of materials, which should be taken into account when developing, producing and using products. To control this significant characteristic of new materials, it is necessary to develop equipment, methods and measurement procedures that take into account the novelty of the specific behavior of these materials. The production of specially shaped samples is the main limitation in thermal expansion measurements. This primarily applies to new materials (heterogeneous, composite, poorly processed) developed for special tasks. These factors necessitated the development of a method for measuring the temperature coefficient of linear expansion of products and materials with arbitrary sample shapes, which was not available in previous implementations of interferometric methods. An interference speckle dilatometer SD was developed for measuring samples with irregular shape in the temperature range from 200 to 400 K. When creating the speckle dilatometer SD, the speckle interferometry method was implemented to measure the elongation of samples with an irregular surface with nanometer sensitivity. Since this device has no analogues, a study was conducted on the uncertainty components arising when measuring the thermal coefficient of linear expansion of materials on this device. The analysis of the uncertainty components of the measurement of the thermal coefficient of linear expansion of materials on the speckle dilatometer SD was carried out. An experimental determination of the measurement uncertainty of the thermal coefficient of linear expansion of TCLE measures of arbitrary shaped samples was obtained using the SD speckle dilatometer. After research and initial certification, the developed measurement instrument was approved and included in the State Secondary Standard of the unit of thermal coefficient of linear expansion of solids in the range of values from 0.05 · 10–6 to 100.0 · 10–6 K–1 in the range of temperature values from 90 to 1,900 K.
Keywords
About the Author
N. F. PukhovRussian Federation
Nikolay F. Pukhov, Senior Researcher
Laboratory of State Standards and Scientific Research in the Field of Thermal Expansion and Complex Thermal Analysis
190005; 19 Moskovsky ave.; St. Petersburg
References
1. Bronstein I. G., Inochkin F. M., Kruglov S. K., Kompan T. A., Kondratiev S. V., Korenev A. S. et al. Optoelectronic measuring system of high-temperature dilatometer. Izmeritelʹnaya Tekhnika. 2015;(12):38–42. (In Russ.).
2. Topics in applied physics. Vol. 9. Laser Speckle and Related Phenomena. Springer-Verlag Berlin Heidelberg; 1975. 295 p.
3. Robertson E. R. The engineering uses of coherent optics : proceedings and edited discussion of a conference held at the university of strathclyde glasgow 8–11 April 19. Cambridge University Press; 1976. 798 p.
4. Kompan T. A. Measuring capabilities and prospects for the development of dilatometry. World of measurements. 2011;7:14–21. (In Russ.).
5. Jones R., Wykes K. Holographic and speckle interferometry. Moscow: Mir; 1986. 327 p. (In Russ.).
6. Kompan T. A., Korenev A. S., Pukhov N. F., Gurov I. P., Dudina T. F., Margaryants N. B. The speckle interferometry method for determining the thermal expansion of nanomaterials nanometrology. Izmeritelʹnaya Tekhnika. 2011;(4):48–52. (In Russ.).
7. Volkov M. V., Margariants N. B., Vlasova V. V., Pukhov N. F. Method of recording and processing speckle interferometer data for determining the thermal expansion of samples by the absolute method. In: Temperature – 2011 : collection of abstracts of reports of the 4<sup>th</sup> All-Russian and COOMET member countries conference on thermometry problems, 19–21 April 2011, St. Petersburg. St. Petersburg: FGUP «VNIIM im. D. I. Mendeleeva». P. 284–286. (In Russ.).
8. Lebedev M. V., Misochko O. V., Driomin A. A. Michelson interferometer with multichannel interferogram recording. Optics and Spectroscopy. 2009;107(5):826–829. (In Russ.).
9. Novak J. Five-step phase-shifting algorithms with unknown values of phase shift. Optik. 2003;114(2):63–68. (In Russ.). doi: 10.1078/0030-4026-00222
10. Ennos A. E. Speckle interferometry. In: Dainty J. C. (ed.). Laser speckle and related phenomena. Berlin : Springer-Verlag; 1975. P. 203–253. doi: 10.1007/978-3-662-43205-1
11. Vasilev V. N., Gurov I. P. Computer processing of signals in application to interferometric systems. St. Petersburg: BHV-St. Petersburg; 1998. 240 p. (In Russ.).
12. Kompan T. A. Metrological support of measurements of thermal expansion of materials. Brief analysis, developments of the last decade and prospects for development of the subject at the FSUE «VNIIM named after D. I. Mendeleyev». Glavnyi metrolog. 2007;(4):36–45. (In Russ.).
13. Sharov A. A., Galyavov I. R., Patrikeev A. P., Ponin O. V., Kompan T. A., Kulesh V. P. Interference dilatometers for measuring the thermal coefficient of linear expansion of thermally stable optical materials. Journal of Optical Technology. 2013;80(4):250–253. (In Russ.).
Review
For citations:
Pukhov N.F. Analysis of the Metrological Characteristics of the Speckle Dilatometer of the State Secondary Standard of the Unit of Thermal Coefficient of Linear Expansion of Solids in the Range of Values From 0.05 · 10–6 to 100.0 · 10–6 K–1 in the Range of Temperature Values from 90 to 1,900 K. Measurement Standards. Reference Materials. 2025;21(2):5-22. (In Russ.) https://doi.org/10.20915/2077-1177-2025-21-2-5-22

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0).