Application of professional standards in forming the competencies of a modern metrologist
https://doi.org/10.20915/2687-0886-2021-17-2-73-81
Abstract
This article discusses the application of professional standards in the formation of students’ competencies in metrology. The analysis of normative documents describing the work of metrology specialists has been carried out. A number of problems that arise during the development of federal state educational standards and basic professional education programs based on professional standards are identified. The possibility of metrology separation from the field of «Cross-cutting types of professional activity in the industry» into a separate and independent area is considered. The construction structure of professional standards’ system is proposed. It includes a policy framework, where the necessary ways to get an appropriate level of qualification, the extent of competence and responsibility, and professional standards for metrologists working in various fields of economic activity and the entire field of metrology are enshrined.
About the Authors
А. V. Mosichkina
D. I. Mendeleyev Institute for Metrology (VNIIM)
Russian Federation
Russian Federation
Аnna V. Mosichkina – head of the center for qualification assessment of D. I. Mendeleyev Institute for Metrology (VNIIM)
19 Moskovskiy ave., St. Petersburg, 190005
M. V. Okrepilov
D. I. Mendeleyev Institute for Metrology (VNIIM)
Russian Federation
Russian Federation
Mikhail V. Okrepilov – D. Sc. (Eng.), associate professor, deputy director of quality and educational activity of D. I. Mendeleyev Institute for Metrology (VNIIM)
19 Moskovskiy ave., St. Petersburg, 190005,
References
1. Guidelines for the development of basic professional educational programs and additional professional programs, taking into account the relevant professional standards. Methodical recommendations of the Ministry of Education and Science of the Russian Federation dated 22 January 2015 No DL-1 / 05vn. Available at: https://base.garant.ru/70884816/ (in Russ.)
2. Order of the Ministry of Labor and Social Protection of the Russian Federation of 12 April 2013 No 148n «On the approval of qualification levels in order to develop draft professional standards». Available at: https://www.garant.ru/products/ipo/prime/doc/70266852/ (in Russ.)
3. Plaksina Yu.G., Syuskina Yu. L. Model of the formation of practice-oriented competencies among bachelor-engineers. Bulletin of SUSU. Series. Education. Pedagogical Sciences. 2016;8(3):93–99. (in Russ.)
4. Mishin I. N. Critical assessment of the formation of the list of competencies in the Federal State Educational Standard of Higher Education 3 ++. Higher Education in Russia. 2018;(4);66–75. (in Russ.)
5. Federal law «On Amendments to the Federal Law» On Education in the Russian Federation» of 26 May 2021 No 144-FZ. Available at: https://www.garant.ru/products/ipo/prime/doc/400709597/ (in Russ.)
6. Order of the Ministry of Science and Higher Education of the Russian Federation «On approval of the federal state educational standard for higher education – bachelor’s degree in the direction of training 27 March 2001 «Standardization and metrology» dated 07 August 2020 No 901. Available at: https://base.garant.ru/74530558/ (in Russ.)
7. Order of the Ministry of Labor and Social Protection of the Russian Federation of 29 June 2017 No 526n «On the approval of the professional standard» Specialist in metrology». Available at: https://base.garant.ru/71729406/ (in Russ.)
8. Order of the Ministry of Labor and Social Protection of the Russian Federation of 31 October 2014 No 856n «On approval of the professional standard» Product quality specialist «(as amended on 12 December 2016). Available at: https://base.garant.ru/70809820/ (in Russ.)
9. Order of the Ministry of Labor and Social Protection of the Russian Federation of 21 March 2017 No 292n «On the approval of the professional standard» Specialist in technical control of product quality». Available at: https://base.garant.ru/71648386/ (in Russ.)
10. Order of the Ministry of Labor and Social Protection of the Russian Federation of 4 March 2014 No 121n «On approval of the professional standard» Specialist in research and development «(as amended on 12 December 2016). Available at: https://base.garant.ru/70620666/ (in Russ.)
11. Order of the Ministry of Labor and Social Protection of the Russian Federation of 11 February 2014 No 86n «On the approval of the professional standard» Specialist in the organization and management of research and development work «(as amended on 12 December 2016). Available at: https://base.garant.ru/70622628/ (in Russ.)
12. Order of the Ministry of Labor and Social Protection of the Russian Federation of 3 December 2015 No. 976n «On the approval of the professional standard» Specialist in non-destructive testing». Available at: https://base.garant.ru/71299180/ (in Russ.)
13. Order of the Ministry of Labor and Social Protection of the Russian Federation of 8 September 2017 No 664n «On the approval of the professional standard» Specialist in metrology in the nanoindustry». Available at: https://base.garant.ru/71772240/ (in Russ.)
14. Order of the Ministry of Labor and Social Protection of the Russian Federation of 11 April 2014 No. 239n «On the approval of the professional standard» Metrology engineer in the field of metrological support for the development, production and testing of nanotechnological products». Available at: https://www.garant.ru/products/ipo/prime/doc/70598640/ (in Russ.)
15. Order of the Government of the Russian Federation of 19 April 2017 No 737-r «On approval of the Strategy for ensuring the uniformity of measurements in the Russian Federation until 2025»; Available at: https://www.garant.ru/products/ipo/prime/doc/71563952/ (in Russ.)
16. Order of the Ministry of Labor and Social Protection of the Russian Federation of 29 September 2014 No 667n «On the register of professional standards (list of professional activities)». Available at: https://base.garant.ru/70807194/ (in Russ.)
17. Federal Law of 03 July 2016 No 238-FZ «On the independent assessment of qualifications». Available at: https://base.garant.ru/71433946/ (in Russ.)
Review
For citations:
Mosichkina А.V., Okrepilov M.V. Application of professional standards in forming the competencies of a modern metrologist. Measurement Standards. Reference Materials. 2021;17(2):73-81. (In Russ.) https://doi.org/10.20915/2687-0886-2021-17-2-73-81
Views:
467
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0).
Email this article 
