National market of reference materials. Curreent state, problems, and development prospects. Part 1. Introduction. Development of the national market of reference materials
https://doi.org/10.20915/2077-1177-2017-13-3-4-9-19
Abstract
The present publication begins a cycle of papers of specialists from the Scientific Methodical Centre at the State Service of Reference Materials for Composition and Properties of Substances and Materials. These papers will be devoted to the problematic issues of forming and developing the national market of reference materials in terms of requirements imposed by the current legislation of the Russian Federation concerning of measurement uniformity assurance, technical regulation and accreditation in the national accreditation system.
Publications are aimed at giving the reader an insight into the common practice of development and use of reference materials of various categories, state regulation procedures when producing and using reference materials taking into account modern requirements in the field of metrological assurance and measurement uniformity in Russia and abroad, together with necessity and importance of harmonization in the field of reference materials, as well as some other aspects of this activity.
This paper discusses main aspects concerning the state of the reference materials market in the Russian Federation and suggestions on its development taking into account modern requirements. The role of state regulation when creating the national market of reference materials in the Russian Federation is shown. The paper specifies possible directions for reference materials production, meeting modern metrological requirements imposed on measurements in the sphere of the state regulation of measurement uniformity assurance.
About the Authors
Yu. S. Bessonov
Ural Research Institute for Metrology
Russian Federation
Russian Federation
Deputy Director for Quality,
4 Krasnoarmeyskaya St., Ekaterinburg 620075
O. N. Kremleva
Ural Research Institute for Metrology
Russian Federation
Russian Federation
Acting Head of State Service of Reference Materials,
4 Krasnoarmeyskaya St., Ekaterinburg 620075
References
1. Mutual recognition of national measurement standards calibration and measurement certificates issued by NMIs (CIPM MRA), signed under the guidance of the International Bureau of Weights and Measures (BIPM) on 14 October 1999. Available at: www.fundmetrology.ru/depository/4%20IntDog/CIPM_MRA.pdf. (In Russ.)
2. ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories Available at: www.iso.org/iso/catalogue_detail?csnumber=39883
3. ISO 17034:2016 General requirements for the competence of reference material producers. Available at: www. iso.org/iso/home/store/catalogue_tc/catalogue_detail.htm?csnumber=29357.
4. Strategy for assurance of measurement uniformity in the Russian Federation until 2025 (Government Resolution No.737-r dated April 19, 2017) Available at: www.fundmetrology.ru/depository/01_npa/rp_737_19042017.pdf. (In Russ.)
5. Federal law «On ensuring the uniformity of measurements» No FZ-102 of 26/06/2008. Available at: www. fundmetrology.ru/depository/01_npa/102-fz_2015. pdf. (In Russ.)
6. Federal law «On Technical Regulation» No FZ-184 of 27/12/2002. Available at: https://rg.ru/2002/12/27/tehreglament-dok.html. (In Russ.)
7. Federal law «On accreditation in national accreditation system» No.412-FZ of 28/12/2013. Moscow. Available at: https:// rg.ru/2013/12/31/akkreditacia-dok.html. (In Russ.)
8. LAC P10:01/2013 ILAC policy on the traceability of measurement results. Available at: http://gac.gov.ge/files/ILAC_ P10_01_2013.pdf
9. RusAccreditation policy on traceability of measurement results. Available at: http://fsa.gov.ru/index/staticview/id/444. (In Russ.)
10. ISO Guide 34:2009 General requirements for competence of reference material producers. Available at: URL: https://www.iso.org/standard/29357.html
11. Order of The Ministry of Economic Development «On approval of accreditation criteria, of the list of documents confirming the compliance of applicant and accredited entity’s with accreditation criteria, and the list of regulatory documents in the field of standardization, the compliance with which ensures the applicants’ and accredited entities’ conformity with accreditation criteria». Available at: https://rg.ru/2014/08/27/akkreditacia-dok.html. (In Russ.)
12. Action plan for implementing the Strategy for assurance of measurement uniformity in the Russian Federation until 2025. Available at: https://government.consultant.ru/documents/3721150?items=1&page=2. (In Russ.)
13. Decree of the Government of the Russian Federation No 328 of 15 April 2014 «State Program on Industrial Development and Improving Industrial Competitiveness». Available at: http://static. government.ru/media/files/1gqVAlrW8Nw.pdf. (In Russ.)
Review
For citations:
Bessonov Yu.S., Kremleva O.N. National market of reference materials. Curreent state, problems, and development prospects. Part 1. Introduction. Development of the national market of reference materials. Measurement Standards. Reference Materials. 2017;13(3-4):9-19. (In Russ.) https://doi.org/10.20915/2077-1177-2017-13-3-4-9-19
Views:
1688
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0).
Email this article 
