rmjournalЭталоны. Стандартные образцыMeasurement Standards. Reference Materials2687-0886D. I. Mendeleyev Institute for Metrology10.20915/2077-1177-2017-12-1-37-42rmjournal-119Research ArticleСтандартные образцыReference materialsОпределение возможности применения неметаллических контрольных образцов для оценки работоспособности дефектоскопических материалов и оценки чувствительности капиллярного контроляPossibility of using non-metallic check samples to assess the performance of penetrant materials and the sensitivity of penetrant testingЛобановаИ. С.LobanovaIrina S.noemail@neicon.ruКалиниченкоА. Н.KalinichenkoAleksey N.noemail@neicon.ruКалиниченкоН. П.KalinichenkoNikolay P.noemail@neicon.ruКамышеваЕ. Н.KamyshevaEkaterina N.noemail@neicon.ruИнститут неразрушающего контроля, Томский политехнический университетРоссияInstitute of Non-destructive Testing, National Research Tomsk Polytechnic UniversityRussian Federation2017010320171313742Copyright © Лобанова И.С., Калиниченко А.Н., Калиниченко Н.П., Камышева Е.Н., 20172017Лобанова И.С., Калиниченко А.Н., Калиниченко Н.П., Камышева Е.Н.Lobanova I.S., Kalinichenko A.N., Kalinichenko N.P., Kamysheva E.N.Данная работа распространяется под лицензией Creative Commons Attribution 4.0.This work is licensed under a Creative Commons Attribution 4.0 License.https://www.rmjournal.ru/jour/article/view/119неметаллфольгавытравливаниеконтрольный образецдефектоскопический материалработоспособностьоценка чувствительностикапиллярный контрольраскрытиенеразрушающий контрольповерхностная несплошностьнепористый материалдефект в деталяхReferencesTesting panel for inspection penetrants having of controlled depth and width: пат. U.S. Patent 3791198A; заявл. 27.11.1972; опубл. 12.02.1974, с. 5.Testing panel for inspection penetrants having of controlled depth and width: пат. U.S. Patent 3791198A; заявл. 27.11.1972; опубл. 12.02.1974, с. 5.Test piece for inspection penetrant performance assessment and comparison U.S. Patent 6729175B2 заявл.14.02.2002; опубл. 04.05.2004, с. 5.Test piece for inspection penetrant performance assessment and comparison U.S. Patent 6729175B2 заявл.14.02.2002; опубл. 04.05.2004, с. 5.Surface penetrant inspection test piece having varying thickness plating: пат. US 4610157A; заявл. 11.12.1984; опубл.09.09.1986, с. 3.Surface penetrant inspection test piece having varying thickness plating: пат. US 4610157A; заявл. 11.12.1984; опубл.09.09.1986, с. 3.Non-destructive liquid penetrant inspection process integrity verification test panel. U.S. Patent WO 2011097146A1 заявл. 31.01.2011; опубл. 11.08.2011, с. 4.Non-destructive liquid penetrant inspection process integrity verification test panel. U.S. Patent WO 2011097146A1 заявл. 31.01.2011; опубл. 11.08.2011, с. 4.Test piece for inspection penetrant performance assessment and comparison: пат. U.S. Patent US 6311538B1; заявл. 23.11.1998; опубл. 06.11.2001, с. 5.Test piece for inspection penetrant performance assessment and comparison: пат. U.S. Patent US 6311538B1; заявл. 23.11.1998; опубл. 06.11.2001, с. 5.ISO 3452-1:2013 2013 Non-destructive testing penetrant testing. Part 1: General Principles // ISO [Электронный ресурс]. URL: www.iso.org/standard/56130.html.ISO 3452-1:2013 2013 Non-destructive testing penetrant testing. Part 1: General Principles // ISO [Электронный ресурс]. URL: www.iso.org/standard/56130.html.ISO 3452-3:2013 2013 Non-destructive testing penetrant testing. Part 3: Reference Test Blocks // ISO [Электронный ресурс]. URL: www.iso.org/standard/59659.html.ISO 3452-3:2013 2013 Non-destructive testing penetrant testing. Part 3: Reference Test Blocks // ISO [Электронный ресурс]. URL: www.iso.org/standard/59659.html.Технология изготовления и исследование образцов для испытаний средств капиллярного неразрушающего контроля / Н.П. Калиниченко [и др.] // Измерительная техника. 2014. № 5. С. 8-10.Технология изготовления и исследование образцов для испытаний средств капиллярного неразрушающего контроля / Н.П. Калиниченко [и др.] // Измерительная техника. 2014. № 5. С. 8-10.Kalinichenko N.P., Kalinichenko A.N., Lobanova I.S., Zaitseva A.A. Universal reference test blocks for liquid penetrant testing // Key Engineering Materials. 2016. Vol. 685. P. 355-359.Kalinichenko N.P., Kalinichenko A.N., Lobanova I.S., Zaitseva A.A. Universal reference test blocks for liquid penetrant testing // Key Engineering Materials. 2016. Vol. 685. P. 355-359.The method of manufacturing nonmetallic test-blocks on different sensitivity classes / N.P. Kalinichenko [и др.] // Journal of Physics: Conference Series. 2016. Т. 671. № 1. Article number 012033.The method of manufacturing nonmetallic test-blocks on different sensitivity classes / N.P. Kalinichenko [и др.] // Journal of Physics: Conference Series. 2016. Т. 671. № 1. Article number 012033.Глазков Ю.А. Особенности аттестации контрольных образцов для капиллярной дефектоскопии // Дефектоскопия. 2004. № 9. С. 74-84.Глазков Ю.А. Особенности аттестации контрольных образцов для капиллярной дефектоскопии // Дефектоскопия. 2004. № 9. С. 74-84.ГОСТ Р 8.736-2011 Измерения прямые многократные. Методы обработки результатов измерений. Основные положения. М.: Стандартинформ, 2013. 22 с.ГОСТ Р 8.736-2011 Измерения прямые многократные. Методы обработки результатов измерений. Основные положения. М.: Стандартинформ, 2013. 22 с.Alburger J. Testing panel for inspection penetrants having of controlled depth and width. Patent US, no. 3791198 A, 1974Alburger J. Testing panel for inspection penetrants having of controlled depth and width. Patent US, no. 3791198 A, 1974William J. Martin, Test piece for inspection penetrant performance assessment and comparison. Patent US, no. 6729175 B2, 1998William J. Martin, Test piece for inspection penetrant performance assessment and comparison. Patent US, no. 6729175 B2, 1998Frank J. Vicki, Setsuo Shimizu, Surface penetrant inspection test piece having varying thickness plating. Patent US, no. 4610157A, 1984Frank J. Vicki, Setsuo Shimizu, Surface penetrant inspection test piece having varying thickness plating. Patent US, no. 4610157A, 1984Dunnwald P. Non-destructive liquid penetrant inspection process integrity verification test panel. Patent US, no. WO 2011097146 A1, 2010Dunnwald P. Non-destructive liquid penetrant inspection process integrity verification test panel. Patent US, no. WO 2011097146 A1, 2010William J. Martin Test piece for inspection penetrant performance assessment and comparison. Patent US. no. 6311538B1, 1998William J. Martin Test piece for inspection penetrant performance assessment and comparison. Patent US. no. 6311538B1, 1998ISO 3452-1:2013 2013 Non-Destructive Testing Penetrant Testing. Part 1: General Principles. Available at: https://www.iso.org/standard/56130.html.ISO 3452-1:2013 2013 Non-Destructive Testing Penetrant Testing. Part 1: General Principles. Available at: https://www.iso.org/standard/56130.html.ISO 3452-3:2013 2013 Non-Destructive Testing Penetrant Testing. Part 3: Reference Test Blocks. Available at: https://www.iso.org/standard/59659.html.ISO 3452-3:2013 2013 Non-Destructive Testing Penetrant Testing. Part 3: Reference Test Blocks. Available at: https://www.iso.org/standard/59659.html.Kalinichenko N.P., Kalinichenko A.N., Lobanova I.S., Popova A.Yu., Borisov S.S. Manufacturing technology and an investigation of samples for testing instruments for the capillary nondestructive testing of nonmetals. Measurement Techniques, 2014, vol. 57, no. 5, pp. 484-488, DOI 10.1007/s11018-014-0485-1.Kalinichenko N.P., Kalinichenko A.N., Lobanova I.S., Popova A.Yu., Borisov S.S. Manufacturing technology and an investigation of samples for testing instruments for the capillary nondestructive testing of nonmetals. Measurement Techniques, 2014, vol. 57, no. 5, pp. 484-488, DOI 10.1007/s11018-014-0485-1.Kalinichenko N.P., Kalinichenko A.N., Lobanova I.S., Zaitseva A.A. Universal reference test blocks for liquid penetrant testing. Key Engineering Materials. 2016, vol. 685, pp. 355-359.Kalinichenko N.P., Kalinichenko A.N., Lobanova I.S., Zaitseva A.A. Universal reference test blocks for liquid penetrant testing. Key Engineering Materials. 2016, vol. 685, pp. 355-359.Kalinichenko N.P., Kalinichenko A.N., Lobanova I.S., Zaitseva A.A., Loboda E.L. The method of manufacturing nonmetallic test-blocks on different sensitivity classes. Journal of Physics: Conference Series. 2016, vol. 671, no. 1. Article number 012033.Kalinichenko N.P., Kalinichenko A.N., Lobanova I.S., Zaitseva A.A., Loboda E.L. The method of manufacturing nonmetallic test-blocks on different sensitivity classes. Journal of Physics: Conference Series. 2016, vol. 671, no. 1. Article number 012033.Glazkov Yu. A. Peculiarities of the Certification of Reference Specimens for Liquid-Penetrant Testing. Russian Journal of Nondestructive Testing, vol. 40, no. 9, pp 629-636. DOI:10.1007/s11181-004-0010-8.Glazkov Yu. A. Peculiarities of the Certification of Reference Specimens for Liquid-Penetrant Testing. Russian Journal of Nondestructive Testing, vol. 40, no. 9, pp 629-636. DOI:10.1007/s11181-004-0010-8.GOST 8.736-2011 Multiple direct measurements. Methods of measurement results processing. Main principles. Moscow, Standartinform, 2015, 40 p. (In Russ.).GOST 8.736-2011 Multiple direct measurements. Methods of measurement results processing. Main principles. Moscow, Standartinform, 2015, 40 p. (In Russ.).
The authors declare that there are no conflicts of interest present.